Make Your Own Case

The Open Pill enclosure design is all about quick, simple and inexpensive depoloyment of a SeedSigner device. The design does not require any additional hardware and can be printed using a standard FDM 3D printer in about 2 hours, no supports necessary. A video demonstrating the assembly process can be found here. To access the design file and printable model, click here.

The Orange Pill enclosure design offers a more finished look that includes button covers and a joystick topper. You’ll also need the following additional hardware to assemble it:

4 x F-F M2.5 spacers, 10mm length

4 x M2.5 pan head screws, 6mm length

4 x M2.5 pan head screws, 12mm length

The upper and lower portions of the enclosure can be printed using a standard FDM 3D printer, no supports necessary. The buttons and joystick nub should ideally be produced with a SLA/resin printer. An overview of the entire assembly process can be found here. To access the design files and printable models, click here.